Setting Up
How to connect the speakers
Français Español English
Figure 3
Speaker cable connection to the powered speaker
The speaker cable is already attached to the accessory speaker. Insert the connector of that cable into the jack marked TO LEFT SPEAKER on the rear of the powered speaker (Figure 3).
Powered | Accessory |
speaker | speaker |
TO LEFT
SPEAKER
RIGHT SPEAKER | LEFT SPEAKER |
Speaker cable
How to connect to the sound source
You can connect up to two sound sources to Companion® 2 speakers – for example, your computer as source A and an external portable audio player as source B.
Note: You can play the second source without missing any sound alerts from your computer. These speakers can provide sound from both sources simultaneously.
Two audio input cables are supplied with the speakers. If your computer has a stereo mini jack, use the cable with a stereo mini plug. Otherwise, use the cable with RCA plugs on both ends.
There are two sets of jacks marked AUDIO INPUT on the rear of the powered speaker. Each set includes a vertical pair of jacks: a white jack marked L is on top and a red jack marked R is below it.
•Use one of the two sets (L and R) to connect your computer as source A.
•Use the other set (L and R) to connect an external portable audio player with an audio output jack, or to connect another component as source B.
Note: Some portable audio players operate through the com- puter’s sound card, while others have a direct audio output jack. Consult the owner’s manual for your equipment to familiarize your- self with how it connects.
8
