Using Your Headphones
English |
Wearing your headphones
You can use your headphones only for noise reduction or for listening to audio along with the benefit of noise reduction.
As you put on the headphones, observe the L (left) and R (right) markings that identify the left and right earcups. Adjust the headband so it rests gently on top of your head and the earcup cushions fit comfortably on your ears.
Using your headphones for audio with noise reduction
For listening to an audio source, you need to use the supplied headphones cord.
Français
1.Plug the appropriate end of the head- phones cord into the left earcup.
2.Plug the other end of the cord into the audio device (see “Connecting to porta- ble and home audio devices” on page 10).
3.Turn on the audio device, making sure the volume is initially set to a low level.
4.Turn on your headphones. The power switch indicator should light.
5.Set the volume level using the volume control on the audio device.
Using your headphones only for noise reduction
Left
earcup
Headphones 
cord 
Power switch indicator 
When using the headphones just for noise
reduction, you do not need to connect the Right earcup
headphones cord. Just turn on your
headphones and put them on your head.
When the battery needs charging
•When the power switch indicator starts flashing the battery is in a
•When replacing a battery, make sure you charge the new battery for a minimum of two hours. See “Charging the battery” on page 6.
•Before storing the battery for an extended period of time, fully charge the battery to maximize its life.
8
