English
Español Français
USING YOUR SYSTEM
Getting the most from your home theater speakers
With system connections completed and the module plugged in, your Acoustimass® system is now ready for use.
You may want to familiarize yourself with the controls and
CAUTION: This system provides an automatic protection circuit to help guard against damage from electrical stresses and overload of the system. At high volume levels, the circuit activates to reduce output, which slightly decreases the volume. If you notice this decrease, be aware that your system is functioning as designed. This volume reduction also indicates that power input to the system may exceed safe levels. Sustained listening at these levels is not recommended.
Figure 9
Audio adjustment knobs
Adjusting the bass/room compensation
After placing the Acoustimass module where you want it, you can
For example:
•If the system performance is “thin” or lacks bass, turn the BASS control (shown above) clockwise to increase the
•If the audio is “boomy” or overemphasizes bass, turn the knob
The setting made at the factory is meant for use in the most common room arrangements.
Adjusting the LFE level
The LFE level control (shown above) is for use only with receivers that provide an LFE/SUB- WOOFER channel.
By turning the knob, you can adjust the relative level of the
You can check all levels by using the “test tones” feature on your digital surround sound receiver. For details on using this feature, refer to the owner’s guide provided with your ! surround receiver.
11