Bose AM319182 manual Connecting your computer

English

TAB 2, 10 TAB 3, 11 TAB 4, 12 TAB 5, 13 TAB 6, 14 TAB 7, 15 TAB 8, 16

SYSTEM SETUP

Connecting your computer

1.Make sure that the wireless source light on the SoundLink™ speaker is flashing.

If not, press the remote wireless source button. The wireless source light should start flashing.

Wireless source light

3.Lift the antenna on the SoundLink USB key to the vertical position and plug it into a USB port on your computer.

Confirm that the SoundLink USB key power light turns on and starts flashing.

Antenna

Wireless source button

2.Make sure your computer is on and all music applica- tions are closed.

Power light and Disconnect-reconnect button

4.Wait a few seconds for your computer to recognize the SoundLink USB key. When ready, it will automati- cally establish a wireless link with the SoundLink speaker. This may take up to 20 seconds the first time, much less after that.

3