English
TAB 2 | TAB 3 | TAB 4 | TAB 5 | TAB 6 | TAB 7 | TAB 8 |
SYSTEM SETUP
8.Connect the speaker cable to the type of speaker you have.
For Jewel Cube® speakers:
Insert the plug into the speaker connector.
For Direct/Reflecting® and Virtually Invisible® single cube speakers:
Press the button and insert the wires. Connect the
Connect the other wire to the black connector.
Note: The rear speaker cables for Direct/Reflecting® and Virtually Invisible® cube speakers are webbed together. You can pull them apart as needed.
9.Put the Acoustimass® module in its final position:
•Upright (BEST) or on either side (ALTERNATE).
BESTALTERNATE
•With the front opening facing into the room.
•At least 18 in (45 cm) from any TV to avoid magnetic interference with the TV image. Move it farther away if you still notice interference.
CAUTION: Do not put electronic media, such as video or audio tapes, on or next to the module for long periods of time. The magnetic field surrounding the module may erase some or all of the recorded material.
CAUTION: DO NOT BLOCK the ventilation openings on the module. This can cause it to overheat.
10.Continue with Kit
4 |
on the next page.
11
