TAB 8 | TAB 7 | TAB 6 | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
SYSTEM SETUP
4.Plug one end of the audio input cable into the Acoustimass® Module connector on the control console.
Make sure the flat surface with the arrow on the plug faces up.
Leave the other end of the cable on the floor. You will be asked to connect it while setting up the next kit.
5.Plug the power supply output cord into the control console Power connector.
Power | AC | |
power | ||
| ||
| cord |
Acoustimass Module
Power supply output cord
6.Remove a power cord
from the power cord kit.
Power supply
7.Plug one end of the power cord into the power supply. Make sure you push the plug in as far as it can go.
8.Plug the other end of the power cord into a live AC (mains) power outlet.
9.Continue with Kit
2 |
on the next page.
4
