Bose AM325310 REV.00 manual Making the power connections, Checking the room code, English

TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2

English

SETUP

Making the power connections

1.Insert the plug (label facing up) of the DC power cord into the DC Power connector.

2.Insert the small plug of the AC power cord into the power pack.

3.Plug the other end of the AC power cord into a live AC (mains) outlet.

DC Power

Checking the room code

The RoomMate® speaker and the remote control used with it must have the same room code. Your RoomMate® speaker is shipped from the factory set up to operate using room code I. See the owner’s guide that came with the remote for instructions on changing the room code.

If room code I is already used by another Bose® link product in your home, you will need to set the speaker to a different room code.

To change the room code in the RoomMate speaker:

1.Find the room code switches on the rear panel.

1

DC power cord

2

Power

3

pack AC power cord

Room code switches 1-4

2.Using a fine-point pen or other small tool, set switches

1 through 4 to the corresponding up and down positions shown for that room code in the following table.

4