Bose 289328, CCM-001770 manual Getting strong remote control range and response

English Español Français

SYSTEM CONTROLS

a. If your remote features the symbol (above the Library button), the four buttons at the bottom function as follows:

In Stored source, queues up and plays other stored tracks that most closely match the style of the current track.

In VCR source (or AUX, if a recorder-type device is connected to that input), ! activates the record function. Not available on remotes set to control Teletext.

In Stored source, when used in conjunction with the number keys, plays the tracks from a specific stored CD of that number.

In Cable source, makes a selection from the A list.

In Stored source, plays all the tracks, if any, assigned to the playlist. Can be used with additional play mode options, like Encore.

In Cable source, makes a selection from the B list.

In Stored source, skips from the track currently playing to the first track on the CD of origin and plays that CD from beginning to end.

In Cable source, makes a selection from the C list.

b. If your remote features the symbol (above the Library button), the four colored buttons at the bottom function as follows:

In Stored source, queues up and plays other stored tracks that most closely match the style of the current track.

In Teletext mode, selects the content labeled red.

In Stored source, when used in conjunction with the number keys, plays the tracks from a specific stored CD of that number.

In Teletext mode, selects the screen content labeled green.

In Stored source, plays all the tracks, if any, assigned to the playlist.

In Teletext mode, selects the screen content labeled yellow.

In Stored source, skips from the track currently playing to the first track on the CD of origin and plays that CD from beginning to end.

In Teletext mode, selects the screen content labeled blue.

Note: To switch your remote from a. functionality to b. (described above), refer to “Remote control options” on page 39 and locate the “Selecting a Remote Control version” option.

Getting strong remote control range and response

The cord that connects the power supply to the media center contains an antenna for your

RF remote. For good range, it is VERY important that you extend this cord to its full length and keep it away from other system cables. P!"#$%&'()*'+,-*.'/0++!1',%'()*'2!,,.3'-*!!'4*!,-' ()*'5*6$"'#*%(*.3'+0(/'()*'#,.6'$%'"'7*.($#"!',.$*%("($,%3'-)$#)'$/',+($5058

Note: Also, when using a plasma screen TV, keeping the media center power supply as far from the TV as is practical improves remote range.

If your system does not respond when you press a button on the remote, it could be time to change the batteries. For information on the type of batteries to use and how to change them, refer to “Replacing the remote control batteries” on page 52.

In some buildings, there may be “dead spots” where remote control signals are not effective. If this happens, move the remote a foot or two and try again. Also make sure the cord that connects the power supply to the media center (and contains the remote antenna) is stretched to its full length and is separated from other power cords. If this does not help, move the media center a few feet to see if a new location provides better response.

If the batteries are not dead and your efforts to avoid dead spots are in vain, you may need an antenna extender. To contact Bose for more information, or to order the extender, refer to the address list included with the system.

11

! !

SYSTEM CONTROLS