Bose CD Player manual Function

! ............._

r_ae_/'sut,e

holdpress

_e_fP_r,e

7;ac_/Tune

7_c_/Tbn_

Function				use when...
To use the nap timer				system is on or off
				see page	16
To adjust the snooze time				in alarm setup mode
				see page	20
To test	the alarm	volume		in alarm setup mode
				see page	20
To set AM/PM {12 hour) or Miitary (24 hour) time				system is off
				see page	15
To check backup battery power evel				system is off
				see page	22
To adjust the display brightness				system is off
				see page	15
To turn the display on/off				system is off
				see page	15
To check the volume setting			volume setting is not displayed
				see page	15
To check the CD time or radio station frequency			display is in clock view or off
				see pages 15, 17, 19
To display elapsed or remaining time for a track or disc				in play or pause mode
				see page	19
To set	continuous	music		in CD mode
				see page	19

To program a CD - You can program up to 32 CD tracks.

1.Place the selected disc in the CD player.

2.Press CD Stop m.

3.Hold down Alarm Setup and press CD Stop m. The display shows Pr01 to indicate programming mode is ready for your first selection.

4	Use Track/Tune	<_ or [::>to select a track.
5.	Hold down Alarm	Setup and press CD Mode _	to program this track. The program
	counter shows Pr02 for the next selection.

6.Continue to select tracks (PRO&Pr04, etc.) until your list is complete.

7.To look through your programmed list, hold down Alarm Setup and press Track/Tune <:_or [::::>You. can change an item while you are viewing it by following steps 4 and 5. To add more items at the end of your list, re-program (step 5) the last entry to continue adding selections.

8.Press CD Play I_ il to play the selected tracks once each. The programmed tracks are shown with the PRESET icon lit.

9.To erase the program, press CD Mode _-_.

Note: Your program is saved until erased. The program plays all applicable track selec- tions for any disc in the CD player.

28