Setting up the remote control
WARNING: Keep the remote control battery away from children. /t may cause a fire or chemical bum ff mishandled. Do not recharge, disassemble, heat above 212°F (100°C), or indnerate. Dispose of used battery prompdy Rep/ace only with a battery of the correct type and model number.
Your remote control may be one of two types (Figure 4A or 4B). Each is identified by the way the battery compartment unlocks to install or replace the battery.
1.Place the remote control face down on a flat surface.
2.If your remote has a slot on the back (Figure 4A), follow step A. Otherwise, follow step B and refer to Figure 4B:
A. Insert the tip of a ballpoint the battery compartment
pen into the slot. Push to the side as shown and hold. Slide open with your finger.
B. Using your finger, push the tab lock to the side as shown and hold. Slide the battery compartment open.
Figure 4A or B
Slot
Locating the safety/ock
A
+ S.ymbol
Tab
B
