Bose CD Player manual Connecting the power cord, Adjusting the antennas

Connecting the power cord

1.Unwind the power cord completely to ensure the best FM reception. The FM antenna is built into the power cord.

2.Plug the power cord into an electric outlet (Figure 3). The display panel lights and the time display begins flashing.

3.Press and hold either Time 4 or _, button to stop the flashing and set the time.

Figure 3

Connecting the power cord

Adjusting the antennas

With the FM antenna built into the power cord, adjusting the cord position affects FM radio reception slightly. With the AM antenna built into the radio, turning the radio more to one side or the other adjusts AM reception slightly.

Receiving cable radio signals as an option

To connect your system to receive the FM signal available from some cable TV companies, contact your cable provider for assistance.

The cable screws onto threads of the FM 75_ EXTERNAL antenna connector on the back of the Wave Radio/CD. To make this connection easier, you may want to obtain a screw-on to push-on RF adapter (available at electronics stores).

,_	CAUTION:	Make sure	the installation	includes	a signal	splitter. It is important that	only the
	FM band,	not the cable	TV band, is transmitted		to the radio. This requires a splitter		that filters
	the signal	to prevent any re-emissions		of the TV spectrum		through the radio.