Français Español
SETUP AND CONNECTIONS
English
Connecting the power cord
Plugging in and turning on the Acoustimass® module is the final step before using the system.
1.Insert the small connector end of the power cord into the AC INPUT jack on the module.
2.Plug the large connector into an AC power (mains) outlet.
3.Turn the power switch, located on the back of the Acoustimass module, to ON ().
On the control pod, the LED turns yellow to indicate the system is on and is ready for use.
Connecting other sources
The control pod features two jacks: one for connection directly to another sound source and the other for a headphone.
•To connect an external CD or MP3 player to your system, plug the cable from the sound source output jack into the input jack ( 
) on the control pod. See Figure 8 on page 11.
•To connect headphones, insert the connector on the headphone cable into the headphone jack 
on the control pod. This connection mutes the sound from the speakers.
10
