Français Español
English
SETUP AND CONNECTIONS
Other suggestions:
•Use the supplied audio input cable, which allows for placement of the module up to 6 feet (2 m) from your sound source.
•To place the module farther from the source, use a shielded audio input extension cable available from retail electronics stores.
Figure 4
Removing a speaker from the stand (a) and applying rubber feet (b) to the speaker
Positioning the speakers
The supplied speaker cables allow the speakers to be set up within 6 feet (2 m) of the module.
The speakers are designed for desktop placement on stands that lift them slightly above the surface or for resting directly on it.
If you prefer to use the speakers without stands, removing them is simple (Figure 4). After removing a speaker from the stand, apply the supplied rubber feet to the bottom surface for stability.
CAUTION: "#
Keep the speakers:
•Up to 3 feet (91 cm) from the sides of the screen.
•At equal distance on each side of the computer monitor or TV and slightly angled away
from it (Figure 2 on page 7).
a.
b.
Making connections
Custom cables supplied with this system simplify connections to the labeled jacks on the rear of the Acoustimass® module (Figure 7).
CAUTION: $"%&
8
