Important notes on system setup and use
To Speakers jacks
Connect only Companion® 3 speakers to the jacks labeled To Speakers on the back of the
Acoustimass® module.
I
I L@~
|
| • | R@ |
|
| I | |
|
|
| |
|
|
| To Speakers |
| o |
| WARNING! Connect only to |
Back of the |
| satellite speakers provided | |
| |||
|
| ||
Acoustimass |
|
| From Computer |
module |
|
| lOG> |
|
|
| |
|
|
| To Control Pod |
|
|
| Power |
|
|
| ~nI( j) I |
|
|
| CJAClnput |
A CAUTION: Connecting any other electronic device to these jacks may damage your equipment.
Control pod cable connector
1.Be sure the cable connector is right side up, with the arrow showing, before inserting it.
2.Insert it into the jack labeled To Control Pod on the back of the Acoustimass module.
I
L@~
R@
|
| To Speakers |
|
|
|
| WARNING! Connect only 10 |
|
|
| o | satellite speakers provided |
|
|
Back of the |
|
| ||
|
|
| ||
Acoustimass |
| From Computer |
|
|
..... | lQ£- |
|
| |
module |
| Control pod | ||
| IIIIIIII" | To Control Pod | ||
|
| To Control Pod |
| cable |
|
| Power |
| connector |
|
| ~nI( ! ) I |
| <§> |
|
| CJ |
| |
|
|
|
| |
|
| AClnput |
|
|
A
System activation
CAUTION: Improperly inserting the control pod cable connector may damage the product.
To begin using the system:
1.Turn on your computer or other sound source.
2.Turn on the Companion 3 speaker system power.
Use the switch labeled Power on the back of the Acoustimass module.
3.Press the top of the control pod to unmute the system (if the indicator light is yellow). The indicator light turns green when the system activates.
4.Adjust the volume by rotating the outer band of the control pod.
Press to activate | Watch for green light |
Rotate to adjust volume
Better sound through research®
AM273708 Rev. 01 Z2T
1I111I1111111111111111111111
273708
