![](/images/new-backgrounds/1031018/3101845x1.webp)
English | Tab 2, 8, 14 | Tab 3, 9, 15 | Tab 4, 10, 16 | Tab 5, 11 | Tab 6, 12 |
|
|
|
|
|
|
The mobile | • Make sure both devices are turned on and |
phone and the | Bluetooth® connectivity is enabled on the |
headset do not | phone. |
connect. | • Turn the headset off, then on again. Make sure |
| the mobile phone is within 33 feet (10 meters) |
| of the headset. |
| • Check the Bluetooth device list on your phone |
| to be sure Bose BT2 is selected. |
| – If it is selected, delete it from the list (refer to |
| your phone instruction manual for details). |
| – If it is no longer listed, repeat “Additional |
| pairing” on page 13. |
| • Simultaneously hold Call and Volume – for |
| 5 seconds to reset the memory, and pair the |
| headset to the phone again. |
| • Turn the phone power off, then on again. |
|
|
What you | • During a call, adjust the volume on your |
hear on the | mobile phone or on the headset by pressing |
headset is not | Volume + or |
clear. | • Check your mobile phone signal strength. |
| • Make sure the mobile phone is within 33 feet |
| (10 meters) of the headset. |
| • Reposition the headset. Refer to “Fitting” on |
| page 14. |
| • Clean the wire mesh under the tip. See page 26. |
|
|
23