JVC KD-R301 manual AF-REG *4 AF on, Volume, Search *4, MONO*6 Mono on, If Band Auto, Wide, FADER*7

ENGLISH

Category		Menu items	Selectable settings, [reference page]
		AF-REG *4	•	AF ON	: When the currently received signals become weak, the unit
		Alternative			switches to another station (the programme may differ
		frequency/			from the one currently received), [9].
		regionalization			• The AF indicator lights up.
		reception	•	AF-REG ON	: When the currently received signals become weak, the
					unit switches to another station broadcasting the same
					programme.
					• The AF and REG indicators light up.
			•	OFF	: Cancels.
		PTY-STANDBY *4	PTY OFF, PTY		Activates PTY Standby Reception with one of the PTY codes,
		PTY standby	codes		[9].
	TUNER	TA VOLUME *4	VOLUME 00		Initial: VOLUME 15
		Traffic	– VOLUME 50
		announcement	(or VOLUME 00
		volume	– VOLUME 30)*5
		P-SEARCH *4	•	SEARCH ON	: Activates Programme Search, [9].
		Programme search	•	SEARCH OFF	: Cancels.
		MONO*6	•	MONO ON	: Activate monaural mode to improve FM reception, but
		Monaural mode			stereo effect will be lost, [7].
			•	MONO OFF	: Restore the stereo effect.
		IF BAND	•	AUTO	: Increases the tuner selectivity to reduce interference noises
		Intermediate			between adjacent stations. (Stereo effect may be lost.)
		frequency band	•	WIDE	: Subject to interference noises from adjacent stations, but
					sound quality will not be degraded and the stereo effect
					will remain.
		FADER*7	R06 – F06		: Adjust the front and rear speaker output balance.
		Fader			[Initial: 00]
		BALANCE	L06 – R06		: Adjust the left and right speaker output balance.
		Balance			[Initial: 00]
	AUDIO	LOUD	•	LOUD OFF	: Cancels.
		Loudness	•	LOUD ON	: Boost low and high frequencies to produce a well-balanced
					sound at a low volume level.
		AUX ADJUST	AUX ADJ 00		: Adjust the auxiliary input level to avoid the sudden
		Auxiliary input	— AUX ADJ 05		increase of the output level when changing the source to
		level adjustment			external component connected to the AUX input jack on
					the control panel.
*4	Only for FM Radio Data System stations.
*5	Depends on the amplifier gain control.
*6	Displayed only when the source is “FM.”
*7	If you are using a two-speaker system, set the fader level to “00.”

14SETTINGS