JVC KD-R302 manual More about this unit, Basic operations, Tuner operations, Settings & References

Category		Menu items	Selectable settings, [reference page]
		BEEP	•	BEEP OFF	: Deactivates the keypress tone.
		Keypress tone	•	BEEP ON	: Activates the keypress tone.
		TEL MUTING	•	MUTING 1/	: Select either one which mutes the sounds while using a
	AUDIO	Telephone		MUTING 2	cellular phone.
		muting	•	MUTING OFF	: Cancels.
		AMP GAIN*8	•	LOW POWER	: VOLUME 00 – VOLUME 30 (Select if the maximum power
		Amplifier gain			of each speaker is less than 50 W to prevent damaging the
		control			speaker.)
			•	HIGH POWER	: VOLUME 00 – VOLUME 50
	SELECT	AM*9	•	AM OFF	: Disable “AM” in source selection.
		AM station	•	AM ON	: Enable “AM” in source selection, [4].
	SRC	AUX IN*10	•	AUX OFF	: Disable “AUX IN” in source selection.
		Auxiliary input	•	AUX ON	: Enable “AUX IN” in source selection, [4].
*8	The volume level automatically changes to “VOLUME 30” if you change to “LOW POWER” with the volume level
	set higher than “VOLUME 30.”
*9	Displayed only when any source other than “AM” is selected.

*10 Displayed only when any source other than “AUX IN” is selected.

ENGLISH

More about this unit

Basic operations

Turning on the power

•By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts.

•After ejecting a disc, “NO DISC” appears and you cannot operate some of the buttons. Insert another disc or press SRC to select another playback source.

•If no operation is done for about 30 seconds after pressing MENU button, the operation will be canceled.

Turning off the power

•If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.

General

•If you change the source while listening to a disc, playback stops.

Next time you select “CD” as the playback source, playback will start from where it had been stopped previously.

Tuner operations

Storing stations in memory

•During SSM search...

–All previously stored stations are erased and the stations are stored anew.

–When SSM is over, the station stored in the lowest preset number will be automatically tuned in.

•When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.

SETTINGS & REFERENCES 15