JVC KD-R302 Displayed only when any source other than “AUX IN” is selected, Settings, Mono Off

	Category		Menu items	Selectable settings, [reference page]
ENGLISH		TUNER	MONO*3	•	MONO ON	:	Activate monaural mode to improve FM reception, but stereo
			Monaural mode				effect will be lost, [8].
				•	MONO OFF	: Restore the stereo effect.
			IF BAND	•	AUTO	: Increases the tuner selectivity to reduce interference noises
			Intermediate				between adjacent stations. (Stereo effect may be lost.)
			frequency band	•	WIDE	: Subject to interference noises from adjacent stations, but
							sound quality will not be degraded and the stereo effect will
							remain.
			FADER*4	R06 – F06		: Adjust the front and rear speaker output balance.
			Fader				[Initial: 00]
			BALANCE	L06 – R06		: Adjust the left and right speaker output balance.
			Balance				[Initial: 00]
			LOUD	•	LOUD OFF	:	Cancels.
			Loudness	•	LOUD ON	: Boost low and high frequencies to produce a well-balanced
							sound at a low volume level.
		AUDIO	AUX ADJUST	AUX ADJ 00		:	Adjust the auxiliary input level to avoid the sudden increase
			Auxiliary input	— AUX ADJ 05			of the output level when changing the source to external
			level adjustment				component connected to the AUX input jack on the control
							panel.
			BEEP	•	BEEP OFF	: Deactivates the keypress tone.
			Keypress tone	•	BEEP ON	: Activates the keypress tone.
			AMP GAIN*5	•	LOW POWER	: VOLUME 00 – VOLUME 30 (Select if the maximum power
			Amplifier gain				of each speaker is less than 50 W to prevent damaging the
			control				speaker.)
				•	HIGH POWER	: VOLUME 00 – VOLUME 50
		SELECT	AM*6	•	AM OFF	:	Disable “AM” in source selection.
			AM station	•	AM ON	: Enable “AM” in source selection, [4].
		SRC	AUX IN*7	•	AUX OFF	:	Disable “AUX IN” in source selection.
			Auxiliary input	•	AUX ON	:	Enable “AUX IN” in source selection, [4].
*3		Displayed only when the source is “FM.”
*4		If you are using a two-speaker system, set the fader level to “00.”
*5		The volume level automatically changes to “VOLUME 30” if you change to “LOW POWER” with the volume level
		set higher than “VOLUME 30.”
*6		Displayed only when any source other than “AM” is selected.
*7		Displayed only when any source other than “AUX IN” is selected.

14SETTINGS