ZOOM 2,ZOOM 3,ZOOM 4,ZOOM 1/2,ZOOM 1/3,ZOOM 1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge.
5.10 Change the Caption Language
In the state of DVD disc playing, press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption.(depend on the media used.)
In the state of VCD/MP3/WMA/CD disc playing, the button is not available.
5.11 Change the Audio Language
1.In the state of DVD disc playing, press the AUDIO button repeatedly on the IR remote controller to select the desired language type. (depend on the media used)
2.In the state of VCD disc playing, press the AUDIO button repeatedly to select the sound mode of the MONO L, MONO R, MIX MONO and Stereo, no language function.
3.In the state of CD/WMA/MP3 disc playing, the AUDIO button is invalid.
5.12 Change the Video Signal System
During playback of DVD/VCD disc, press the BAND button on the front panel or the P/N button on the remote controller repeatedly to change the VIDEO SIGNAL SYSTEM mode.
5.13 Look over the Playback Status
1.In the state of DVD disc playing, press the OSD button repeatedly on the remote controller to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing title, the serial number of the playing chapter, the elapsed time of the playing chapter, the remained time of the playing chapter, the elapsed time of the playing title, the remained time of the playing title, etc.
2.In the state of VCD/CD disc playing, press the OSD button repeatedly on the remote controller to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remained time of the playing track, the elapsted time of the disc, the remained time of the disc.
3.In the state of MP3/WMA disc playing, press the OSD button repeatedly on the remote controller to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remained time of the playing track.
3. Radio Operation
1.BAND BUTTON
In RADIO mode, press the BAND button on the remote controller or on the front panel to select your desired radio band of FM1, FM2, FM3, MW1 and MW2, and the word means which band is selected will be displayed on the small monitor of the front panel.
2.TUNE/SEEK UP/DOWN BUTTONS In RADIO mode:
1)Long press the >>/ << button to automatically search up/down for a available station from the current frequency.
2)Briefly press the >> / << button to manually search up or down with step by step for your desired station from the current frequency.
3.APS BUTTON In RADIO mode:
1)When long pressing the APS button, the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished. And then the 6 strongest stations are preset to the corresponding preset number memory bank. The AS operation is implemented in the each bank of the selected band. When the AS operation is finished, it will resume broad- casting on the M1.(It can store 3x6 stations for FM and 2x6 stations for AM in all)
2)When briefly pressing the APS button on the front panel or the remote controller, the radio searches for each preset station from the M1. When the field strength level is more than the threshold level of the stop level, the radio is holding at that preset number for few seconds with releasing mute, and then searches again. After finishing a circle of searching, it will stop
searching on the M1.
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time. In MW band, MW1, MW2 is checked one at a time.
4. PRESET STATION [
1)To memorize the current frequency on the current band, long press any one of the six preset buttons
2)To recall the preset memory on the current band, press one of the preset buttons
5.STEREO/MONO BUTTON
Press the ST button on the remote controller to select the STEREO or MONO sound mode for FM band.
6.LOC BUTTON
1)In RADIO mode, when the signal of the distance radio station are very weak and the receiving effect is bad during tuning, check whether there is the word LOC on LCD. If there is the word LOC on LCD, press this button to turn off the LOC function, then tune again for the distance radio station;
2)In RADIO mode, when the signal of the local radio station are too strong to lead that the interference to the receiving effect during tuning, press this button to turn on the LOC function to display the word LOC on LCD, then tune again for the local radio station.
7. Changing radio system | EUROPE USA | ||
Before installation, dialling the Radio System Toggle in | Radio System Toggle |
|
|
| |||
the left side face of the unit can change the radio system between Europe and USA. After it, you need to reset the system to zero.
In USA mode, the buttons of PTY, AF and TA in the front panel serve as ones of LOUD, EQ and LOC ; the buttons of PTY, AF and TA in the Remote Control are not available.
