8.PTY (PROGRAM TYPE) BUTTON
Press the PTY button shortly to select one of the following mode: PTY MUSIC group- - PTY SPEECH group- - PTY OFF
While selecting PTY TYPE, its selection is implemented by preset buttons (press one of the 6 preset buttons shortly and repeatedly to select the PTY TYPE in the preset button) as follows:
PTY music group | PTY speech group | OFF |
1. POP M, ROCK M | 1. NEWS, AFFAIRS, INFO |
|
2. EASY M, LIGHT M | 2. SPORT, EDUCATE, DRAMA |
|
3. CLASSICS, OTHER M | 3. CULTURE, SCIENCE, VARIED |
|
4. JAZZ, COUNTRY | 4. WEATHER, FINANCE, CHILDREN | |
5. NATION M, OLDIES | 5. SOCIAL, RELIGION, PHONE IN | |
6. FOLK M | 6. TRAVEL, LEISURE, DOCUMENT | |
When PTY MUSIC or PTY SPEECH is on, the PTY item and PTY word is displayed on LCD.
After selecting a desired PTY item, it will search corresponding PTY infor- mation, and stops if the corresponding PTY information is detected.
During 1 loop, if desired PTY is not found, PTY NONE is flashed, then return to previous normal radio and PTY word disappear.
9.AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed the AF button short, the AF switching mode is selected and the state of the AF switching mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When the AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of checking time of each AFs depends on the signal strength of the current station, from a few minute for the strong station to a few seconds for the weak station. Every time that a new AF is stronger than the current station, it switches over to that frequency for very short time, and the NEW FREQUENCY is displayed for
In FM mode, when AF is on, SEEK, (SCAN),
10. TA [TRAFFIC ANNOUNCEMENT] BUTTON
Press the TA button shortly to turn on TA search mode. When traffic announcement is transmitted:
1).If the unit is in Disc Play mode, it will switch to radio mode temporarily.
2).Temporarily switch over to an EON linked station when EON detects a
traffic announcement on that other program, and TA, TP will be displayed on LCD
*TA interruption function:
The current traffic announcement is cancelled by pressing TA button shortly.
*When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic program identification code has been received.
5.5 Playback in Scan Mode
1.In the state of VCD(PBC OFF)/CD disc playing, press the INT button to play the previous 15 seconds part of each track on the disc. Press the INT button again to resume normal playback.
2.In the state of DVD/MP3/WMA disc playing, the INT button is not available.
5.6 Playback from a specified chapter/track or a specified time
1.In the state of DVD disc playing, press the SEARCH button to display a interface and highlight the title item, then use the number buttons to input the serial number of the title; use the direction buttons to highlight the chapter item, then use the number buttons to input the serial number of the chapter; you can still use the direction buttons to highlight the time item, then use the number buttons to input the desired time to start playback; finally press the OK or PLAY button to play the selected chapter or play from the selected time.
2.In the state of VCD/MP3/WMA/CD disc playing, press the SEARCH button to display a interface and highlight the track item, then use the number buttons to input the serial number of the track; you can still use the direction buttons to highlight the time item, then use the number buttons to input the desired time to start playback; finally press the OK or PLAY button to play the selected track or play from the selected time.
5.7 Playback in Random
In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD disc playing, press the RDM button to switch between RANDOM (ON)/RANDOM OFF. When in RANDOM (ON) mode, it will play in random.
5.8 Playback in Different Angle
1.In the state of VCD/MP3/WMA/CD disc playing, the ANGLE button on the IR remote controller is not available.
2.In the state of DVD disc playing, press the ANGLE button repeatedly on the IR remote controller to view in different angle.(This function is only for the DVD discs with ANGLE function)
5.9 Playback in Zoom Mode
In DVD/VCD mode, during playback, press the ZOOM button continuously to enlarge a certain area of the images on the screen with these multiples:
