INSTRUCTIONS |
| INSTRUCTIONS | |
|
|
|
|
For example: As PIC 2, touch certain category you want, then touch "ok" to inter the category. After that, touch any file to play. It shows like the PIC 3 below.
(PIC 2)
(PIC 3)
4. Video Play
In the files menu, touch any part of the touch screen, then touch the "MOD" on the screen control (see PIC 4) to enter the "ipod" mode. Main menu, picture 4:
(PIC 4)
Touch "VIDEO" on the main menu and the unit will switch to " ipod "operation mode, while, control the "ipod" player, and select the video file you want to play, while the video picture will transfer to the unit screen. During the unit playing the video, "ipod" player must set as Video mode, if not the unit only with audio but not video.
"Ipod" Video mode setting:
Select "Video" on the main menu of the "ipod" player. If not ready the video mode setting, will never play the video file. The setting instruction as below:
(1)TV Out: ON
(2)TV signal : PAL/NTSC
(3)Full Screen: OFF
When selecting video mode, must switch to "ipod"" operation mode. Unless the unit will only with voice but not picture.
About "ipod" players operation instruction, please refer to the ipod player's instruction manual.
After plugging in ipod player and switch to ipod mode, and enter the ipod UI screen. At that time ipod player will display the "Sunplus" logo as the picture bleow.
To
Sunp.us
TechnologyfOlEasyUre
Attached to acressory
@
When you see this picture, the ipod player is out of control
Above operation instruction is according to the "ipod" edition 1.3
Note:
Since ':ipod" edition keeping
32 | 33 |
