![](/images/new-backgrounds/1182060/18206025x1.webp)
06 | MP3/USB/SD | Installation | 02 |
Playing a MP3/USB/SD Disc
Insert a MP3 disc into the slot, the programs in the disc will be played, if a MP3 disc is loaded, press SOURCE to start the playback.
Insert an USB into the slot, the programs in the USB will be played, if there has an USB, press SOURCE to start the playback.
Insert a SD card into the slot, the programs in the card will be played, if there has SD card, press SOURCE to start the playback.
When playing a disc included PIC file, first
press 18 ,then press [ ][ ] to select the option.
Note:
*You can eject a disc by pressing EJECT button on the base or on the remote
control or in the monitor.
*After inserts USB or SD must wait for 20 seconds to be able to eject the disc.
Selecting Tracks Fast
During MP3/USB/SD playback, press
27to play the previous track, Press
27to play next track.
Note:
*Pressing and
button on the head
unit or and
in the monitor also performs the same function.
Repeat Playing
During MP3/USB/SD playback , press 15 RPT to replay the current track, press it again to cancel this function.
Note:
*This function is operated by using the remote control.
*The default setting is single Repeat.
Number Buttons
Press one of 23 Number Buttons(0~9) to select a track to play automatically.
Note:
*This function is operated by using the remote control.
*Press 22 CLEAR to clear the mistake input.
¼ ò ¹µ Ê¥ ÅÕ ÅÏ Ö³ ¸ý Ä Ï
Stop Playing
During MP3/USB/SD playback, Press 18 to stop the playback.
Note:
*Press in the monitor performs the same function.
Selecting Tracks
During MP3/USB/SD mode, firstly press
2GOTO and the TFT s Number to play it ; secondly press GOTO button, and the TFT shows :
Note:
*This function is operated by using the remote contro only.
Pause the Playback
During MP3/USB/SD playback, press to switch between play and pause.
Note:
*Press in the monitor or
on the head unit performs the same function.
Install the Unit
Main Parts List |
|
|
|
|
|
| M4x3£ p &M5x5£p |
Mounting Sleeve x1 | Rear Mounting Bolt x1 | Harness Rubber x1 | 4 Screws Each |
| 6 | 7 |
|
|
|
| |
Outer Trim Frame x 1 | Connecting Wire x1 | Steel Bar x 1 |
|
Installation Method ![](/images/new-backgrounds/1182060/18206025xi27.webp)
DIN Front-Mount
Panel
Install twor M5x5 screws on both sides (left and right) of the lock hook brackets
Bend these claws outward for a tight fit, if necessary.
Install the unit with four M2 2 screws
Fire Wall
To support the unit
Install Outer Trim Frame
32 | 13 |