To engineers in charge of repair or inspection of our products.

Before repair or inspection, make sure to follow the instructions so that customers and Engineers in charge of repair or inspection can avoid suffering any risk or injury.

1. Use specified parts.

The system uses parts with special safety features against fire and voltage. Use only parts with equivalent characteristics when replacing them. The use of unspecified parts shall be regarded as remodeling for which we shall not be liable. The onus of product liability (PL) shall not be our responsibility in cases where an accident or failure is as a result of unspecified parts being used.

2. Place the parts and wiring back in their original positions after replacement or re-wiring. For proper circuit construction, use of insulation tubes, bonding, gaps to PCB, etc, is involved. The wiring connection and routing to the PWB are specially planned using clamps to keep away from heated and high voltage parts. Ensure that they are placed back in their original positions after repair or inspection. If extended damage is caused due to negligence during repair, the legal responsibility shall be with the repairing company.

3.Check for safety after repair. Check that the screws, parts and wires are put back securely in their original position after repair. Ensure for safety reasons there is no possibility of secondary ploblems around the repaired spots. If extended damage is caused due to negligence of repair, the legal responsibility shall be with the repairing company.

4.Caution in removal and making wiring connection to the parts for the automobile. Disconnect the battery terminal after turning the ignition key off. If wrong wiring connections are made with the battery connected, a short circuit and/or fire may occur. If extensive damage is caused due to negligence of repair, the legal responsibility shall be with the repairing company.

5.Cautions regarding chips.

Do not reuse removed chips even when no abnormality is observed in their appearance. Always replace them with new ones. (The chip parts include resistors, capacitors, diodes, transistors, etc). The negative pole of tantalum capacitors is highly susceptible to heat, so use special care when replacing them and check the operation afterwards.

6. Cautions in handling flexible PCB

Before working with a soldering iron, make sure that the iron tip temperature is around 270... Take care not to apply the iron tip repeatedly(more than three times) to the same patterns. Also take care not to apply the tip with force.

7.Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

- 2 -

Page 1 Page 3
Page 2
Image 2
Boss Audio Systems CH600 specifications
Page 1 Page 3

CH600 specifications

Boss Audio Systems CH600 is a powerful and versatile car amplifier that offers impressive performance for audiophiles and casual listeners alike. With a focus on delivering high-quality sound in a compact and efficient package, the CH600 serves as an ideal choice for those looking to enhance their in-car audio experience.

One of the standout features of the Boss CH600 is its peak power output of 600 watts. This robust power capability allows the amplifier to drive a variety of speakers with ease, ensuring that every note is delivered with clarity and punch. The amplifier is designed with a class A/B topology, which provides a good balance of efficiency and sound quality. Class A/B amplifiers are known for their exceptional sound reproduction, making the CH600 suitable for both music and spoken word applications.

The CH600 is equipped with advanced technologies to optimize audio performance. It includes a variable low-pass filter, which helps in fine-tuning the frequency response. This feature allows users to adjust the cutoff frequency according to their preferences and the specific characteristics of their speakers. Additionally, the amplifier comes with a built-in bass boost, enabling users to enhance the low-end frequencies for a richer and more immersive sound experience.

Another notable characteristic of the Boss CH600 is its compact design. Measuring just 10.6 inches in length, it can be easily installed in tight spaces, making it an excellent choice for a wide range of vehicles. Despite its small footprint, the amplifier is constructed using high-quality materials that ensure durability and reliability over time.

The CH600 also features a MOSFET power supply. This technology is known for providing high efficiency and rapid switching capabilities, which contribute to improved audio performance and reduced distortion. The use of MOSFETs additionally aids in heat dispersion, allowing the amplifier to operate effectively even under heavy use.

In summary, the Boss Audio Systems CH600 stands out in the competitive market of car amplifiers due to its impressive power output, advanced audio technologies, and compact design. Whether you're upgrading your factory sound system or building a custom audio setup, the CH600 is a reliable choice that promises to elevate your in-car listening experience to new heights.
Top Page Image Contents