44
Chapter 3 Saving a Tone
On the GT-10B, you can “swap” or exchange the positions of two User patches. The following explains how this is done.
You can return (initialize) a User patch to its original factory settings. This is convenient when you want to create a new patch
from scratch.
Any tone settings you’ve stored in a patch are lost once the initialization is executed.
Exchanging Patches (PATCH EXCHANGE)
1.
Select the exchange source patch.
“Selecting a Tone (Patch Change)” (p. 30)
2.
The PATCH COPY screen appears.
When edits have been made to the currently
selected patch, the PATCH WRITE screen is
displayed.
3.
Select the PATCH EXCHANGE (page 2) screen.
4.
Select the exchange destination User patch.
To cancel the Exchange procedure, press [EXIT].
The Play screen returns to the display.
You can also use the procedure described in
“Using the Pedal to Select the Patch” (p. 31) to
select the exchange destination.
5.
The GT-10B exchange the positions of the two User patches.
Initializing Patches (PATCH INITIALIZE)
1.
The PATCH COPY screen appears.
When edits have been made to the currently
selected patch, the PATCH WRITE screen is
displayed.
2.
Select the PATCH INITIALIZE (page 3) screen.
3.
Select the User patch you want to initialize.
To cancel the Initialize procedure, press [EXIT].
The Play screen returns to the display.
You can also use the procedure described in
“Using the Pedal to Select the Patch” (p. 31) to
select the initialize destination.
4.
The selected patch is initialized.
GT-10B_e.book 44 ページ ２００８年２月２６日　火曜日　午後３時３０分