General precautions
Please read this manual completely and carefully prior to attempting to
install your new 
mobile audio/video equipment. Installed
correctly, your 
equipment will provide you with years of enjoyable and safe usage.
Installation of this equipment in any portion of a vehicle which impairs or distracts the driver is improper and
dangerous.
assumes no liability whatsoever for failure to follow the proper installation of this product.
Please keep this manual in a safe place for future reference.
Safety precautions
•Do not operate this equipment while driving – safe driving should always be your highest priority.
•Do not open or attempt to repair this unit yourself. Dangerous high voltages may be present which may result in electric shock. Refer any repairs to a qualified service technician.
•Do not attempt to repair a damaged, broken or faulty power cord. Replace it with a new one immediately.
•If there is smoke or any peculiar odor present during use or if there is damage to any of the component enclosures, immediately unplug the power cord and send the monitor to your local dealer or service center as soon as possible.
Installation precautions
Do not install components in areas which are susceptible to rain, moisture, direct sunlight, extreme heat or cold, excessive dust, dirt or humidity.
Use only the installation parts and hardware provided with the unit to ensure proper installation. Using other parts can cause malfunction and possible damage to your 
headphone system.
Use only a power source with 12 Volts DC (negative ground).
Before final installation, temporarily connect the wiring according to the diagram near the end of this manual, check it to ensure that it has been connected properly, and test the unit to make sure it is working correctly.
What is included?
The
•Wireless audio transmitter
•(2) wireless headphones
The HP10 is an additional set of wireless headphones for use with
the 
monitors with wireless infrared audio transmission capability.
