Using the Effects
DELAY/MODULATION
DELAY / MODULATION indicator
Pedal indicator
DELAY / MODULATION pedal
This provides the delay effect, in which the sound is slightly delayed and is fed back to the direct sound, and the modulation effect, which adds a sort of swell to the sound to give it greater breadth.
The
DELAY/MOD pedal
The Delay/Modulation is switched on or off each time you press the pedal. When switched on, the DELAY/MOD indicator and pedal indicator light up.
* When .TAP DLY is selected, holding down the DELAY/ MOD pedal for at least two seconds, causes the effect to turn off.
*When HOLD DLY is selected, you cannot switch the effect on/ off by pressing the pedal.
*DELAY ON/OFF switches the Delay at the input to provide a more natural effect. For this reason, if the FEEDBACK is turned up when the Delay is turned off, the delay sound will remain briefly.
*When a setting other than HOLD DLY, CHO + REVERB, or REVERB is selected, you can use the DELAY/MOD pedal to input the tempo, and set the delay time synchronized to the performance tempo.
“ .TAP DLY” (refer to the following)
“Adding a Delay Synchronized to the Performance Tempo” (p. 16)
“Adding a Modulation Synchronized to the Performance Tempo” (p. 17)
TYPE knob
Selects the effect to be used from the eleven different effects that are available.
.TAP DLY
This is a tempo delay that lets you set a dotted eighth note delay time for the performance tempo by pressing the DELAY/MOD pedal in time with the performance tempo.
*The delay time can be set within the range of 46.5 ms to 1050 ms.
“Using the .TAP DLY Function” (p. 16)
TIME/RATE knob
This has no effect or function.
FEEDBACK/DEPTH knob
Adjusts the amount of feedback (number of repeats). Turning the knob to the right increases the number of times the sound repeats.
E.LEVEL/RESONANCE knob
Adjusts the volume of the delay sound.
HOLD DLY
Up to 2.8 seconds of performance content is recorded, then played back repeatedly. You can also layer this as you perform something else, then record these together (overdub).
You can keep the recorded content playing continuously as backing and produce other special effects.
“Using the HOLD DLY Function” (p. 16)
TIME/RATE knob
This has no effect or function.
FEEDBACK/DEPTH knob
This has no effect or function.
E.LEVEL/RESONANCE knob
Adjusts the volume of the playback sound.
14
