Saving and Loading the Created Tones (Memory Mode)

If the Patch Does Not Change

●Is the ME-50B in Manual mode (p. 21)?

●Is the ME-50B in Patch Edit mode (p. 24)?

●Is the ME-50B in Tuner mode (p. 25)?

Notes When Using Memory Mode

•The settings for each patch are called up from internal memory in the Memory mode. Therefore, each knob's position and the patch settings may not match, when the patch is called up.

•In Memory mode, you cannot switch effects on or off using the No. 1, 2, and 3 pedals.

About Tone Changes

By operating the knobs, you can change the tone of a patch while it’s called up. Note, however, that the changed tone is only temporary, and will be lost when you switch patches or switch to the Tuner mode (p. 25).

If you want to store it in memory, carry out the Write procedure (p. 22).

*If there is a discrepancy between the current knob position and the parameter stored in the patch, the change in the parameter begins at the point when the knob is moved past the position matching the parameter value as stored in the patch.

About the Tempo Setting

If you hold down the currently selected number pedal for at least two seconds, the pedal indicator flashes, and the ME- 50B switches to tempo setting mode, and the number pedal can then be used to input the tempo.

Selecting from the following types while DELAY/ MODULATION is on allows you to set the delay time or rate.

•ANALOG DLY

•0-400 ms DLY

•300-1400 ms DLY

•PHASER

•FLANGER

•CHORUS

•CHO+DELAY

*When DELAY/MODULATION is off, you cannot change to tempo setting mode.

Note, however, that the tempo setting is only temporary, and will be lost when you switch patches or switch to the Tuner mode (p. 25).

If you want to store it in memory, carry out the Write procedure (p. 22).

About the HOLD DLY

When a Patch that has a TYPE setting of HOLD DLY is called up, the currently selected number pedal’s indicator flashes slowly, indicating that the ME-50B is in recording standby. Afterwards, the following conditions are in effect.

•Pressing the currently selected number pedal rapidly: begins recording

•Pressing the currently selected number pedal rapidly during recording:

stops recording, starts Loop Playback

•Pressing the currently selected number pedal rapidly during Loop Playback:

overdub recording

•Pressing the currently selected number pedal rapidly: stops overdub recording, starts Loop Playback

•Holding down the currently selected number pedal for the same length of time as the recording time: releases the HOLD, switches to recording standby

About the TAP DLY

When DELAY is ON and a Patch that has a TYPE setting of TAP DLY is called up, the currently selected number

pedal’s indicator flashes, and you can then set the delay time (p. 16) using tap input.

23

Page 22 Page 24
Page 23
Image 23
Boss Audio Systems ME-50B owner manual About Tone Changes, About the Tempo Setting, About the Hold DLY, About the TAP DLY
Page 22 Page 24

ME-50B specifications

Boss Audio Systems ME-50B is a versatile and highly regarded multi-effects processor designed specifically for bass guitarists. Known for its robust build quality and rich feature set, the ME-50B offers an array of tools that cater to both live performance and studio environments, making it a popular choice among professional and amateur musicians alike.

One of the standout features of the ME-50B is its user-friendly interface. The pedalboard layout consists of six selection knobs and six footswitches, enabling effortless access to an extensive range of effects. This intuitive design allows bassists to quickly adjust settings and switch between effects, making it ideal for performances where spontaneity is crucial.

The ME-50B is equipped with a comprehensive selection of effects, including various distortions, overdrives, and compression options. Its built-in chorus, flanger, and phaser effects add depth and texture to the bass sound, allowing musicians to explore a wide palette of sonic possibilities. Additionally, the pedal features a powerful EQ section, providing control over frequency levels, which enhances tonal shaping.

Technologically, the ME-50B incorporates COSM (Composite Object Sound Modelling) technology, which delivers high-quality sound processing by accurately replicating the characteristics of classic amplifiers and cabinets. This ensures that players can achieve a range of tonal signatures, from vintage to modern, with ease. Furthermore, the processor includes a built-in tuner, making it a practical tool for on-the-go musicians.

Another significant characteristic of the ME-50B is its loop function, which enables artists to create and layer sounds in real-time. This feature is especially valuable for practicing and composing, allowing players to build complex arrangements with multiple effects.

The ME-50B also supports battery and AC power options, providing flexibility for use anywhere. Its sturdy construction means it can withstand the rigors of gigging, while its relatively lightweight design facilitates portability.

In conclusion, the Boss Audio Systems ME-50B is an exceptional multi-effects processor designed with bassists in mind. Its array of features, including a user-friendly interface, diverse effects, COSM technology, and practical functionality, make it an indispensable tool for musicians looking to enhance their sound. Whether in the studio or on stage, the ME-50B continues to be a reliable choice for bass guitar players seeking creativity and versatility.
Top Page Image Contents