Remote control installation, continued
4.Hold the remote in front of the cup with the top up, and as you hold it, rotate it about 20º counterclockwise.
Hold the remote in front of the cup, turned about
20º counterclockwise.
20º |
5.Insert the remote control fully into the cup so that the mounting hooks go through the slots in the back of the cup.
If your installation is one in which the cable is exiting out the bottom of the housing (NOT the back), as you insert the remote module pull the cable down gently so it does not interfere with the insertion of the remote into the cup.
6.Grasp and turn the remote to the right until it is in the correct position.
If you feel resistance when you insert the remote into the cup, pull the remote housing out and check that the cable has been pressed into the curved slot, as described in Step 3).
MR1640W User’s Manual - page 9
