27

Playing a Phrase Only Once (One-Shot Playback)

When a phrase is saved to a phrase track (1-11), it’s initially
set to loop playback. After is has been saved, turning the
MODE knob to allows you to use the TAP TEM-
PO/SELECT/ENTER button to toggle between loop play-
back (LOOP/ONE SHOT indicator: green) and One-Shot
playback (LOOP/ONE SHOT indicator: red).

In live performances, One-Shot playback is use-
ful for saved phrase tracks containing twin gui-
tar solos, special effects sounds, or any other
sounds you wish to trigger “sampler style.”

*
When you want One-Shot playback enabled every time a
desired phrase track is selected, save the phrase after switching
it to One-Shot playback (“Saving Phrases (WRITE)”;
p. 32
).

Loop Playback

When the pedal is pressed, the phrase is played re-
peatedly from beginning to end.

One-Shot Playback

The phrase plays one time from beginning to end
and then stops automatically.

* Overdubbing is disabled when one-shot playback is in effect.
If the pedal is pressed during playback of the phrase, the
phrase starts playing from the beginning again (retrigger
playback).
If you want to overdub, first switch to loop playback.
* You cannot switch to One-Shot playback with phrases that
have not been saved after recording.
* If you want to stop a One-Shot phrase while it is playing
back, press the pedal twice within a period of 0.5 seconds.
RC-2_e.book 27 ページ ２００６年１０月２７日　金曜日　午前１０時３１分