Boss Audio Systems RC-2 . MODE Knob

9

Panel Descriptions

15

. MODE Knob

Use this knob to switch between the RC-2’s operating modes.

MODE Knob Position

Description

The pedal switch can be used to set the tempo as well as control recording, playback, and

overdubbing (p. 18).

The pedal switch is used to control recording, playback, and overdubbing (p. 13).

(This is the RC-2’s normal operating mode.)

AUTO

After the pedal switch is used to put the RC-2 in recording standby, recording begins automat-

ically when audio is received at the INPUT or AUX IN jack (p. 16).

4/4

Allows you to use the TAP TEMPO/SELECT/ENTER button to set the time signature for the

guide (p. 36).

Allows you to use the TAP TEMPO/SELECT/ENTER button to select the guide sound pattern

(p. 36).

Allows you to use the TAP TEMPO/SELECT/ENTER button to toggle between loop and

one-shot playback for the selected phrase track (p. 27).

DELETE

Allows you to use the TAP TEMPO/SELECT/ENTER button to save a phrase to the selected

phrase track the selected phrase track

(p. 33).

WRITE

Allows you to use the TAP TEMPO/SELECT/ENTER button to save a phrase to the selected

phrase track (p. 32).

RC-2_e.book 9 ページ２００６年１０月２７日　金曜日　午前１０時３１分

Contents

Main Page Using AUTO Mode to Automatically Start Phrase Recording with Audio Input Main Features Panel Descriptions 1. AC Adaptor Jack 3. AUX IN Jack 2. CHECK Indicator ... Technique for Stopping Operation 7. Pedal Switch 6. STOP/TEMPO Jack 1311 1410 12 15 9 . PHRASE SELECT KNOB . TAP TEMPO/SELECT/ENTER Button WRITE DELETE 4/4 . MODE Knob MODE Knob Position WRITE DELETE 4/4 Connections Connections NOTE (Placement) Turning the Power On/Off Important <Note> Caution when turning off the power Creating Loop Phrases by Recording Guitar or Bass Performances Creating Loop Phrases by Recording Guitar or Bass Performances Creating Loop Phrases by Recording Guitar or Bass Performances 7. 6. Using AUTO Mode to Automatically Start Phrase Recording with Audio Input Using AUTO Mode to Automatically Start Phrase Recording with Audio Input Recording After Setting the Tempo with the Pedal Recording After Setting the Tempo with the Pedal Creating Loop Phrases by Recording Audio from a CD/Digital Audio Player * For instructions on how to stop playback, refer to Technique for Stopping Operation (p. 6). Creating Loop Phrases by Recording Audio from a CD/Digital Audio Player Creating Loop Phrases by Recording Audio from a CD/Digital Audio Player Defeating AUX IN Compensation <CAUTION> Playing/Overdubbing Along with a Saved Phrase Playing/Overdubbing Along with a Saved Phrase Recording and Performing Along with the Guide Using the RC-2 for PracticingPhrase Trainer Changing the Tempo for Practice Playing a Phrase Only Once (One-Shot Playback) Loop Playback One-Shot Playback Operating the RC-2 with an External Footswitch Connect the FS-5U to the STOP/TEMPO jack. When Connecting an FS-5U When Connecting Two FS-5Us or an FS-6 Operating the RC-2 with an External Footswitch 3. Press the RC-2s pedal to begin playing the phrase. 2. Operating the RC-2 with an External Footswitch 4. Press the other footswitch or the RC-2s pedal twice in succession to end playback. Saving and Deleting Phrases Temporary Memory Deleting a Phrase from About Memory What is a phrase track? Saving and Deleting Phrases Saving Phrases (WRITE) <CAUTION> Saving and Deleting Phrases Erasing a Saved Phrase (DELETE) Write Protect Mode About the Tempo and Time Signature What is Loop Quantize? Without LOOP QUANTIZE LOOP QUANTIZE Setting the Tempo Setting the Time Signature (4/4) Setting the Guide Pattern ( ) 2. for the Guide Guide Pattern List Changing the Battery Troubleshooting Page Specifications RC-2: Loop Station Recommended Load Impedance Dry battery/9 V type (6F22 (carbon), 6LR61 (alkaline)) NOTICE AVIS FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT