FASTENER DEPTH CONTROL ADJUSTMENT
When using the framing contact arm:
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just above the work surface to shallow or deep countersink.
TO ADJUST THE FASTENER DEPTH CONTROL:
DISCONNECT TOOL FROM AIR SUPPLY BEFORE ATTEMPTING
ANY PARTS DISASSEMBLY AND BEFORE CHANGING THE WORK
CONTACTING ELEMENT ADJUSTMENT.
1.Push in on locking button.
2.Adjust contact arm up to increase depth of drive or down to decrease it.
3.Release locking button
PUSH IN
ADJUST
RELEASE
LOCKING BUTTON
CONTACT ARM
DIRECTIONAL EXHAUST DEFLECTOR
Exhaust Deflector
The adjustable exhaust deflector can be rotated into any desired position by hand without the use of any tools.
N88RH/WWB
REMOVING NAILS
2
1. | Pull pusher back until it engages latch. |
2. | Slide nails back to opening and push out. |
| 1 |
7
