DEPTH ADJUSTMENT
Always disconnect air supply: 1. Before making adjustments; 2. When servicing the tool; 3. When clearing a jam; 4. When tool is not in use; 5. When moving to a different work area, as accidental actuation may occur, possibly causing injury.
FASTENER CONTROL ADJUSTMENT
The Fastener Control adjustment feature provides close control of the fastener drive depth; from flush with the work surface to shallow or deep countersink. First, set the air pressure for consistent drive in the specific work. Then use the Fastener Control adjustment to give the desired depth of drive.
TO ADJUST FASTENER CONTROL ADJUSTMENT:
1.With air pressure set, drive a few fasteners into a representative material sample to determine if adjustment is necessary.
2.If adjustment is required, disconnnect air supply.
|
Depth Adjustment Knob |
Depth Adjustment Knob
