Radio
7
Tuning to an FM or AM station
Tune / Track
Press the FM or AM button to select the desired band.
•Press the Tune/Track arrow button once to automatically seek the next clear station.
•Tap the Tune/Track arrow button repeatedly to tune one frequency at a time.
•Hold down the Tune/Track arrow button to tune rapidly.
About FM Reception
FM signals are like TV signals. One antenna orientation may be best for one station but not for another. The straight wire antenna supplied with your MicroSystem CD is conveniently small. It should be extended to its full length, placed as far away from the power cord as possible, and oriented for best reception. If reception is weak, try changing the position of the wire antenna. Be sure not to run it along the power cord, as this will substantially decrease the signal reception.
If reception is still weak, you can improve it by connecting an external antenna. Your authorized Boston dealer or Boston’s Technical Support Department can suggest solutions. In addition, many Cable TV systems provide an FM feed that can be connected to the MicroSystem CD via its standard
About AM Reception
MicroSystem CD has a
Storing FM and AM stations
7 1
10 4
8
2
11
5
9
3
12
6
You can store any station by holding down any one of the numbered Preset buttons for 3 seconds until the MicroSystem CD beeps. The display will show the Preset number. Pressing its Preset button will recall the station and will turn on the MicroSystem CD if it is off. Each Preset button can store one station for AM and another for FM.
Storing a second set of presets
7 1
10 4
8
2
11
5
9
3
12
6
The MicroSystem CD can store a second group of Presets. To store Preset numbers 7 through 12, tune to the desired station, select the Preset button that is paired with the number printed above it, and quickly tap twice, holding down on the second tap until you hear the beep. Once stored, you can select the same station by quickly tapping this Preset button twice.
