POLARITY
Please note that the 1012 DAC Preamplifier conforms to the standard
of pin 2 as the high or hot pin for all analog balanced inputs and outputs.
Because input and output polarities are handled through programming
setups and the remote control, no concern for polarity is needed while
connecting sources.
Digital connectors have no polarity.
CONNECTING A BALANCED ANALOG SOURCE
To fully realize the sonic potential of your 1012 DAC Preamplifier,
use balanced connections whenever possible. Balanced cables reduce
interference from magnetic and RF sources to an absolute minimum.
Connect each line source to one of the three inputs provided. Later,
you will be able to name each input with the source’s name, so you
might want to make a list as you connect them.
GETTING
STARTED
1-5