BOULDERLINK ID
Again pressing the DISPLAY pushbutton will make “PROGRAM
BOULDER LINK, BOULDER LINK ID 20” show in the display. Rotating
the volume control changes the ID number. For more information consult
the Boulderlink section.
Unless you are using two or more 1012 DAC Preamplifiers together,
this setting should be left at “20.”
REMOTE ID
Again pressing the DISPLAY pushbutton will make “PROGRAM
REMOTE ID, REMOTE CONTROL ID 3” show in the display. Rotating
the volume control changes the ID number. This feature is used in
conjunction with a wiring change in the remote control and should be
left set at “3.” Consult your dealer to change this setting.
BOULDERLINK SPEED
Again pressing the DISPLAY pushbutton will make ”BOULDER
LINK SPEED, 62500 BAUD-Standard” show in the display. Rotating the
volume control changes the baud rate. This feature increases the 1012’s
compatibility with other brands of equipment. Consult your dealer to
change this setting.
4-7
PROGRAMMING