PIONEER202DEMONSTRATION
Here is a quick way to demonstrate the basic features of your PIONEER 202.
I. Supplies Needed
• | A quarter (25¢) • A penny (1¢) | • A dime (10¢) |
• | A nickel (5¢) • Small piece of aluminum foil • A nail |
II.Position your Pioneer 202
•Place the detector on a table, with the search coil hanging over the edge.
•Be sure that the search coil is far away from walls or metal objects. Keep the search coil away from any metal in the table.
•Turn off appliances or lights which cause electromagnetic interference
III.Beginning Switch Settings
•Right Knob (DISC/NOTCH) —
100% counterclockwise to low
• Left Knob (SENSITIVITY) — click on and set to 3:00 (3/4 turn)
• Do not press any touchpads
IV. All Metal Detection
A. Wave all objects under the search coil
•NOTICE THE TONES
V.Discriminate Mode
A.Turn the right knob (DISC/NOTCH) slowly to the right past the "DISC" indication.
B.Wave all objects under the search coil at different "DISC" settings.
•NOTICE THE DIFFERENT TONES
•NOTICE THE METALS ELIMINATED
VI. Notch Mode
A. Press the NOTCH touchpad
B. Right knob (DISC/NOTCH) 100% counterclockwise to low C. Wave all objects under the search coil while
slowly turning the right knob clockwise.
• NOTICE THE DIFFERENT TONES
• NOTICE THE METALS ELIMINATED
VII. Auto Notch Mode
A. Press the AUTO NOTCH touchpad
B. Right knob (DISC/NOTCH) 100% counterclockwise to low
C. Wave all objects under the search coil while slowly turning the right knob clockwise.
• NOTICE THE DIFFERENT TONES
• NOTICE THE METALS ELIMINATED
6