Bounty Hunter 202 Basicoperation, Turning On Your Detector, Set The Mode, All Metal, Discriminate

BASICOPERATION

TURNING ON YOUR DETECTOR

Turn the left knob (SENSITIVITY) to the right. As the knob clicks to the "On" position, the detector sounds three beeps, the LCD arrows appear momentarily, and the unit pre-sets to the DISC/ALL METAL mode of operation.

SET THE MODE

1.ALL METAL

A.Press the DISC/ALL METAL touchpad

B.Turn the right knob (DISC/NOTCH) to the left.

The unit will emit sound when passing over all types of metal objects. The ALL METAL mode offers the greatest depth detection capability.

2.DISCRIMINATE

A.Press the DISC/ALL METAL touchpad

B.Slowly turn the right knob (DISC/NOTCH) clockwise.

As you turn the knob clockwise the detector will first eliminate small iron objects such as nails. When rotated clockwise, large iron objects are eliminated, followed by trash items such as foil and aluminum.

3. NOTCH

Press the NOTCH touchpad, and the detector will automatically reject iron. Turn the DISC/NOTCH knob clockwise for selective elimination of various junk items while still detecting nickels, silver and copper coins, and small gold items. NOTCH eliminates medium tone trash items while still detecting valuable low and high tone metals. (audio tone ID is discussed later).

4. AUTO NOTCH

Press the AUTO NOTCH touchpad, and the detector will automatically reject iron and most pull-tabs. Nickels and most small gold rings will be retained. The DISC/NOTCH knob creates a rejection "window" which can be moved as it is turned clockwise. With this mode, you can reject screw caps and zinc (post 1982) pennies as the DISC/NOTCH control is turned clockwise, but still detect valuables with low and high tones.

Note: If you are not sure of your current mode setting, simply press the desired touch-pad again.

7