How To Assemble: unilite
| unilite Specifications |
|
|
Maximum Power | 100W |
Lamp (230V) | 100W Compact Fluorescent |
BW3377 | (6400K) |
Lamp (117V) | 100W Compact Fluorescent |
BW3372 | (6400K) |
STEP 1 - Firstly secure the unilite to your stand or support system and put the canopy over the head as shown above.
STEP 4 - Repeat steps 2 & 3 for all four rods until your unilite appears the same as the picture shown above.
STEP 7 - Next, loop velcro over the tab and pull until the canopy is secure over the rod.
4www.bowens.co.uk
STEP 2 - To attach the canopy to unilite use the rods provided. To secure the rods first insert through corner tabs as detailed in the picture above.
STEP 5 - Next hold on to a corner tab and the rod and pull the corner tab over the rod. Repeat for three of the corners.
STEP 8 - Once your canopy is in place, gently screw the lamp into the unilite making sure to hold onto the base of the lamp and not the glass.
STEP 3 - Next, ensure that the rods are inserted through the retaining loops inside canopy while making sure the rods are secure inside the unit.
STEP 6 - For the final corner tab a strip of velcro has been provided to allow for easy assembly. Simply attach as shown above.
STEP 9 - For additional lighting control a fabric diffuser has been included to soften light output. To use simply attach using the velcro corners to secure to canopy.
Supply Voltage |
| 50/60Hz (BW3370) | ||
| 50/60Hz (BW3375) | |||
|
| |||
Fuse |
| 3.15A (F) 20mm HRC | ||
Dimensions |
| 460mm - 18” | (h) | |
| 460mm - 18” | (w) | ||
(including bracket & canopy) |
| |||
| 340mm - 13.5” (d) | |||
|
| |||
Weight |
| 1.45Kg / 3.2lb | ||
PERFORMANCE |
| Illuminance (Lux) | ||
| @1m |
| @2m | @3m |
without diffuser | 1600 |
| 450 | 200 |
with diffuser | 900 |
| 220 | 95 |
www.bowens.co.uk 5