Contents
Description | Page |
Introduction | 3 |
Safety Notes | 3 |
Operation | 3 |
General Features | 3 |
How to Assemble: unilite | 4 |
unilite Specifications | 5 |
How to Assemble: unilite+ | 6 |
unilitePlus+ Specifications | 7 |
2www.bowens.co.uk
Introduction
Dear Valued Customer,
Welcome to the
In order to obain the full benefit from your purchase, please take a few moments to familiarise yourself with this user guide.
Safety Notes
·The unilite must not be used in an environment where moisture or flammable vapour is likely to come into contact with the unit. A fire hazard exists if flammable materials are placed in close proximity to the lamp when in use.
·Do not obstruct the airflow around the unit and keep all vents clear at all times.
·Disconnect from mains and allow to cool before fitting/removing acessories or changing fuse/lamp. Never replace the fuse with a different type or rating. A spare fuse is contained in the fuse holder.
·Avoid placing cables where they can be tripped over. Protect from heavy, sharp or hot objects.
·Damaged cables must be replaced immediately.
·A fire hazard exists if lamps other than those specified are used.
Operation
Select a stand or system to support the weight and dimensions to ensure stable operation of the unit. Ensure that the mounting bracket screw is fully tightened. The angle of the head may be set using the locking handle, always support the unit before releasing the handle and never force adjustment without releasing the handle.
Use the mains lead supplied by your Bowens dealer to connect to a suitable mains supply - 220/240V 50/60Hz or 110/130V 50/60Hz.
Note: light output will improve after the lamp has been switched on for a few minutes.
General Features
The Bowens unilite is a continuous light source employing a lightweight reflective canopy. The unit is supplied with a daylight 6400K lamp suitable for video studios or digital photography. The light output from the
Features Include:
·100W compact fluorescent lamp, equivalent to a 500W incandescent lamp.
·Adjustable mounting bracket to fit 16mm spigot for stand or
overhead mounting.