Napco Security Technologies XP-400 manual Important - Test Your System Weekly, Table of Contents

Introduction

Table of Contents
Keypad Controls and Indicators	5
Arming your System (When Leaving)	6
Bypassing Zones	6
Protecting Yourself While Home	7
Emergency Keys	8
Disarming the System	9
Silencing an Alarm	9
Special Functions	10
Programming User Codes	11
System Troubles	12
Glossary	15

System Information

Central Station Phone Number: ____________________

Central Station Account Number: ____________________

For Service Call: ____________________

Entry Delay: ____________________

Exit Delay: ____________________

Alarm Time-out: ____________________

	Important - Test Your System Weekly !
	1 Bell / Battery Test	2.	Secure all zones to light Ready Light on your keypad.
	Test your bell or siren by pressing ￿followed by ￿.	3.	Enter your user code to Arm the system.
	This will cause the bell, or siren to sound for 2 seconds and	4.	Violate your alarm by opening a window / door etc.
	also initiate a test of the battery .
		5.	The siren or bell should sound and the system will send
	2 Central Station Communication Test
			the alarm signals to the Central Station
	(This test should only be performed on weekends or at a
		6 . Enter your user code to silence the bell or sounder.
	time designated by your alarm company)
	1. Notify Central Station of the impending test.	7. Call Central Station to insure that the alarm signals were
			received properly.
4

Oi220a	Tuesday, September 16, 1997 08:30
page 4