Special Functions
By pressing followed by the appropriate key, (do not press simultaneously) these special functions and features can
be enabled:
Easy Arm (when system is disarmed)
The Easy Arm feature allows the system to be armed by pressing !followed by . This will allow the easy
arming of the system by someone who is not a regular !system user.
Easy Exit (when system is armed)
This function (if programmed) allows an occupant to leave the premises without disarming the system. Pressing
followed by while the system is armed will start a 3
minute period, during which you can leave through the Exit/ Entry door.
Bell / Battery Test
Pressing followed by will cause the bell, or siren to
sound for 2 seconds. This will also initiate a test of your battery to make sure it is adequately charged. The
also performs an automatic battery test very 24 hours
Access Output
If programmed, pressing followed by will activate
the | Access Output which may be configured to open a |
door | strike, turn on lighting, or activate some other special |
feature your installer has provided.
10
Instant Mode
Pressing followed by will cancel the Entry delay
and put the system into the “Instant” mode. This is typic- ally done in the evening when all family members are home for the night. When the system is disarmed, the Instant
mode will be canceled.
Chime Mode On / Off
Pressing followed by will activate / deactivate the
door chime. Activating this feature will cause any door to beep the keypad sounder when it is opened.
Program Mode
Pressing followed by will enable the “Program
Mode”, which will allow you to program and erase user codes. (see Programming user codes, page 14)
Kepad Sounder On / Off
Pressing followed by will deactivate / activate the
keypad sounder, depending on its present state. By activating sleep mode on a keypad installed in a bedroom, for example, you effectively turn off that keypad’s sounder. However, any other keypads on the system will still sound normally.
Oi220a | Tuesday, September 16, 1997 08:30 |
page 10 |
|
