Disarming Your System / Silencing an Alarm
ARMED
READY
SYSTEM
ZONE 1
ZONE 2
ZONE 3
ZONE 4
Disarming Your System when Returning
1 Enter your premises through the Entry/Exit door. The keypad will sound a steady tone to remind you to disarm the system before your Entry Delay time expires.
2 Enter your user code. The Red Armed light will go out, indicating that the system has been disarmed. Note: If you make a mistake entering your code, press the key and
Alarm Indication
If the Red Armed light is flashing rapidly, an alarm occurred while you were away.
Proceed with caution!
For your own protection, leave immediately and call authorities from a neighbor’s phone .
Silencing an Alarm
In the event that the system goes into alarm due to a violated burglary zone, the bell or siren will sound and the keypad sounder will also activate. To silence the system, enter your User code. The zone light of the zone which went into alarm continue flashing until is pressed to reset the alarm memory.
9
Oi220a | Tuesday, September 16, 1997 08:30 |
page 9 |
|
