Napco Security Technologies XP-400 manual Protecting Yourself While at Home, Instant Mode

Models: XP-400

1 16
Download 16 pages 52.12 Kb
Page 7
Image 7
Protecting Yourself While at Home

Arming Your System

ARMED

READY

Instant ModeSYSTEM

ZONE 1

ZONE 2

ZONE 3

ZONE 4

Protecting Yourself While at Home

1 Before arming your system, make sure the Green Ready light is ON. This indicates that all of your protective zones are secure. If any zones are open, the corresponding Zone light will be ON. Secure those zones before proceeding.

2 Enter your user code. The Green Ready light will go out, and the red Armed light will light.

 

3 Before your exit delay expires, press

to bypass any interior zones, deactivating devices such

 

as motion sensors, and allowing free movement throughout the premises. The Zone light of any

bypassed zones will flash slowly.

 

 

Your system may have been programmed for Automatic Interior Bypass , in which case

it will

 

recognize that you have not left the premises and will automatically bypass any interior

zones.

Instant Mode

Pressing !followed by ￿will cancel the Entry delay , activating the “Instant” mode. This is typically

done in the evening when all family members are home for the night. Instant Mode can be activated at any time after the system has been armed. The Red Armed light will flash rapidly while in the Instant Mode.

Easy Exit (optional)

Your System may have been programmed to allow Easy Exit, which allows a user to exit the premises with the system armed. By pressing ￿followed by ￿, the protection is removed from the Exit/ Entry

zone for 3 minutes. This will allow, for example, an early morning commuter to exit the house in the morning, without having to disarm and rearm the system, waking the family.

Arming With a System Trouble Present (the 9 System Light is Lit)

If the XP400 has a system trouble present, the SYSTEM light will be lit and the keypad sounder pulsing. If you cannot immediately clear the system trouble, the system can still be armed. Simply

press

to view the trouble, press

again to reset the trouble and then arm the system.

For more information, refer to page12.

Note: System troubles should be repaired as soon as possible.

7

Oi220a

Tuesday, September 16, 1997 08:30

page 7

 

Page 7
Image 7
Napco Security Technologies XP-400 Protecting Yourself While at Home, Instant Mode, Easy Exit optional, Arming Your System