How To Assemble: unilite+
| unilite+ Specifications |
|
|
Maximum Power | 200W |
Lamp (230V) | 200W Compact Fluorescent |
BW3391 | (6400K) |
Lamp (117V) | 200W Compact Fluorescent |
BW3396 | (6400K) |
STEP 1 - Firstly secure the unilite to your stand or support system and put the canopy over the head as shown above.
STEP 4 - Repeat steps 2 & 3 for all four rods until your unilite appears the same as the picture shown above.
STEP 7 - Next, gently screw the lamp into the unilite making sure to hold onto the base of the lamp and not the glass.
6www.bowens.co.uk
STEP 2 - To attach the canopy to unilite use the rods provided. To secure the rods first insert through corner tabs as detailed in the picture above.
STEP 5 - Next hold on to a corner tab and the rod and pull the corner tab over the rod. Repeat for all four of the corners.
STEP 8 - Once your canopy and lamp have been assembled your unilite should appear as shown above.
STEP 3 - Next, ensure that the rods are inserted through the corner tabs and are secured inside the unit as pictured above.
STEP 6 - Once all four corner tabs are secured over the rods your unilite should appear as shown in the picture above.
STEP 9 - For additional lighting control a fabric diffuser has been included to soften light output. To use simply attach using the velcro corners to secure to canopy.
Supply Voltage |
| 50/60Hz (BW3390) | ||
| 50/60Hz (BW3395) | |||
|
| |||
Fuse |
| 3.15A (F) 20mm HRC | ||
Dimensions |
| 508mm - 20” | (h) | |
| 508mm - 20” | (w) | ||
(including bracket & canopy) |
| |||
| 520mm - 20.5” (d) | |||
|
| |||
Weight |
| 2.4Kg / 5.29lbs | ||
PERFORMANCE |
| Illuminance (Lux) | ||
| @1m |
| @2m | @3m |
without diffuser | 2700 |
| 700 | 330 |
with diffuser | 1250 |
| 330 | 150 |
www.bowens.co.uk 7