Bowflex 5.1 manual Attaching Leg Hold Down Attachment

STEP 4: Attaching Leg Hold Down Attachment

7 6

5

6

4

7

20

1

Parts:

•(1) Bench Frame Assembly from Step 3 - Item 1

•(1) Leg Hold Down Tube - Item 4

•(1) Leg Pad Bar - Item 5

•(2) Leg Pad - Item 6

•(2) Leg Pad End Cap - Item 7

Hardware:

• (1) Pull Pin

Assembly Steps:

4-1 Attach the Leg Hold Down attachment to the Bench Frame Assembly (1).

Begin by inserting the Leg Pad Bar (5) through the hole in the Leg Hold Down Tube (4), leaving room on each side for the Leg Pads.

4-2 Slide both Leg Pads (6) onto the Leg Pad Bar (5) so that the entire assembly is centered on the Leg Hold Down Tube (4).

Secure the Leg Pad End Caps (7) onto each end of the Leg Pads (6).

4-3 Attach the Leg Hold Down Assembly to the Bench as shown in the figure, with the hook portion of the Leg Hold Down Tube (4) resting on the rubber stop of the bench and the top portion of the Leg Hold Down Tube aligning with the pull pin hole (20).

Secure the Leg Hold Down by inserting the pull pin through the Leg Hold Down Tube and the bench through the area shown (20).