31
SETTING

SETTING MENU

Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SETTING and press the SELECT button. Another
dialog box SETTING Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to set, and
then press the SELECT button to set it "On" or "Off".
1
2
Blue back When this function is in the "On" position, this projector
will produce a blue image instead of the video noise on
the screen when the input source is unplugged or
turned off.
Display When this function is in the "On" position, the On-
Screen Displays always appear when adjustments are
made. (The following displays disappear by switching
this function "Off.")
●Preparation Display
(The Number-counting-down Display)
●Mode Display
●Volume/Mute Display
●Zoom Display
●Focus Display
●Normal Display
●No show Display
●Keystone Display
●D.Zoom Display
The Lamp age function is designed to reset the lamp
replacement monitor timer. When replacing the lamp,
reset the lamp replacement monitor timer by using this
function. (Refer to page 34.)
Lamp age

SELECTING LANGUAGE

Press the MENU button and the ON-SCREEN MENU will
appear. Press POINT LEFT/RIGHT buttons to select
LANGUAGE and press the SELECT button. Another dialog
box LANGUAGE Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the language that you want to set,
and then press the SELECT button.
1
2
The language used in the ON-SCREEN MENU is selectable from
among English, German, French, Italian, Spanish and Japanese.
Set the Pointer to the item,
and then press the SELECT
button.
Move the Pointer to the
language that you want
to set, and then press
the SELECT button.
Ceiling When this function is in the “On” position, the top /
bottom and the left / right reversed picture is provided
to project the image from a ceiling mounted projector.
Rear When this function is in the “On” position, the left / right
reversed picture is provided to project the image to a
rear projection screen.
Split wipe Turn this function “On” in the SETTING menu. The
picture will change into next one by sliding black image
side ways like drawing the black curtains when the
input source is changed.
Ceiling function
Rear function