Basic operations (continued)
Freeze function
This function is used to freeze the image being displayed. (refer to page 10)
VIDEO 
RGB
LASER
STANDBY/ON POSITION
| RESET |
MENU |
|
| FREEZE |
MAGNIFY | VOLUME |
1 | OFF |
| |
P in P | MUTE |
BLANK | AUTO TIMER |
1 | Press the FREEZE button. |
• The image being displayed will freeze. |
• The [ 
] mark appears in the lower right corner of the screen when the Freeze function is on.
Cancelling the FREEZE function
1 | Press the FREEZE button. |
• The FREEZE function will be cancelled. |
• The [ 
] mark will be displayed for approximately 3 sec. when the FREEZE function is cancelled.
Caution • When there is no input signal, the Freeze function is not effective when the input signal is outside the sync range.
•Pressing the FREEZE button alternately turns the freeze function on and off.
•The FREEZE function will be cancelled when the input select button is pressed or the display mode of the PC being used for display is changed.
•When a still image signal is input when the FREEZE function is on, make sure not to forget to cancel the FREEZE function.
•FREEZE function will be cancelled after the operations such as “FOCUS + ,
“P in P”, “AUTO”, “BLANK”, “VOLUME 
”,“MENU”, “MUTE” and “POSITION”.
15
