GAS CONNECTIONS

The gas supply lines must meet all requirements of the National Fuel Gas Code ANSI Z223.1-(Latest Edition) and/or in Canada CAN/CGA B149 Installation Codes - (Latest Editions).

The minimum permissible gas supply pressure for the purpose of input adjustment is 1.0” water column (.25kPa) above the operating manifold pressure. See the rating plate and combination gas control for the manifold pressure and gas type. The maximum permissible gas supply pressure is 14.0” water column (3.5kPa) for natural gas and liquefied petroleum gases/propane gas.

1.Connect this water heater only to the type of gas (Natural or Propane gas) as shown on the rating plate. Use clean 1/2 inch black iron pipe. (Dirt and

scale from the pipe can enter the combination control and cause it to malfunction). The inlet gas line must have a minimum length of 3” (7.6 cm) drip leg (sediment trap) installed as close to the water heater’s combination gas control as possible. A ground joint union must be installed in the gas supply line feeding the water heater to permit servicing of the water heater. Compounds used on the threaded joints of the gas piping must be resistant to the action of liquefied petroleum gases/propane gas.

2.This water heater and its gas connection must be leak tested before placing the water heater in operation. Check for gas leaks with a soap and water solution and a brush or a commercial leak detector fluid. NEVER USE A

MATCH OR OPEN FLAME FOR TESTING!

CAUTION

The water heater and individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of the system at test pressures in excess of 1/2 psi (3.5 kPa). The water heater must be isolated from the gas supply piping system by closing its manual shutoff valve during any pressure testing of the gas supply system at test pressures equal to or less than 1/2 psi (3.5 kPa). The supply line must be capped when not connected to the water heater.

16

Page 16
Image 16
Bradford-White Corp Convection Heater instruction manual GAS Connections, Match or Open Flame for Testing

Convection Heater specifications

Bradford-White Corp has established itself as a leader in the heating industry, particularly with its innovative convection heaters designed for both residential and commercial applications. These convection heaters are engineered to provide efficient warmth while maximizing energy savings, making them an ideal choice for those seeking reliability and performance.

One of the standout features of Bradford-White convection heaters is their advanced heating technology, which ensures a smooth and even distribution of warmth throughout a space. This is achieved through the use of high-quality heat exchangers that optimize the transfer of heat from the heating element to the surrounding air. By utilizing natural convection currents, these heaters maintain a consistent temperature while minimizing draftiness often associated with traditional heating methods.

The compact design of Bradford-White convection heaters allows for flexible installation options, fitting seamlessly into various environments without taking up excessive space. Their sleek and modern aesthetic complements a range of interior decors, making them not only functional but also visually appealing.

Energy efficiency is another key characteristic of these convection heaters. Equipped with advanced insulation materials and smart temperature controls, they operate with reduced energy consumption, resulting in lower utility bills for homeowners and businesses alike. Many models also come with programmable thermostats, allowing users to set specific heating schedules that align with their daily routines.

Durability and reliability are paramount in the manufacturing of Bradford-White convection heaters. Built with high-grade materials and subjected to rigorous testing, these heaters are designed to withstand the demands of daily use while providing safe operation. Features such as overheat protection ensure that the units operate safely, preventing any potential hazards.

Moreover, Bradford-White offers a variety of models to meet different heating needs. From wall-mounted units for smaller spaces to larger floor models for more substantial areas, customers can select the perfect unit to suit their specific requirements. The heaters are also backed by solid warranties, offering peace of mind for those investing in quality heating solutions.

In summary, Bradford-White Corp's convection heaters combine efficiency, design, and advanced technology, making them a top choice for consumers seeking reliable heating solutions. With features tailored to enhance performance and user experience, these heaters are well-suited for diverse applications, ensuring comfort in various environments year-round.