MAINTENANCE

WARNING

Water heaters are heat producing appliances. To avoid damage or injury there shall be no materials stored against the water heater or vent-air intake system, and proper care shall be taken to avoid unnecessary contact (especially by children) with the water heater and vent-air intake system. UNDER NO

CIRCUMSTANCES SHALL FLAMMABLE MATERIALS, SUCH AS GASOLINE OR PAINT THINNER BE USED OR STORED IN THE VICINITY OF THIS WATER HEATER, VENT-AIR INTAKE SYSTEM OR IN ANY LOCATION FROM WHICH FUMES COULD REACH THE WATER HEATER OR VENT-AIR INTAKE SYSTEM.

IMPORTANT

The water heater should be inspected at a minimum annually by a qualified service technician for damaged components and/or joints not sealed. DO NOT operate this water heater if any part is found damaged or if any joint is found not sealed.

The following maintenance should be performed by a qualified service technician at the minimum periodic intervals suggested below. In some installations, the maintenance interval may be more frequent depending on the amount of use and the operating conditions of the water heater. egular inspection and maintenance of the water heater and vent-air intake system will help to insure safe and reliable operation.

1.Annually check the operation of the thermostat.

2.The flow of combustion and ventilation air MUST NOT be restricted. Make sure slots in jacket are open and unobstructed. Clear jacket slot openings of any dirt, dust, or other restrictions. WARNING! The ventilation air system may be HOT.

3.At all times keep the water heater area clear and free from combustible

materials, gasoline and other flammable vapors and liquids.

4.Bi-annually conduct a visual check of the main and pilot burner flames to determine that they are burning properly. See Burner Flame Check section of this installation and operation manual. If sooting or other burner anomalies are evident, shut down the water heater by turning off the gas per the instructions listed in this manual or as listed on the water heater.

5.Annually remove the inner door and main burner assembly to clean orifices and related parts of any dirt or other foreign material. Inspect the burner ports for obstructions or debris and clean with a wire brush as needed. Wire brush and/or vacuum clean the combustion chamber as needed to remove scale deposits and debris. NOTE: It is imperative for proper operation of the water heater that the inner door be replaced in the original location, making certain the resettable thermal switch is properly connected to the gas control wire leads provided.

21

Page 20 Page 22
Page 21
Image 21
Bradford-White Corp Convection Heater instruction manual Maintenance
Page 20 Page 22

Convection Heater specifications

Bradford-White Corp has established itself as a leader in the heating industry, particularly with its innovative convection heaters designed for both residential and commercial applications. These convection heaters are engineered to provide efficient warmth while maximizing energy savings, making them an ideal choice for those seeking reliability and performance.

One of the standout features of Bradford-White convection heaters is their advanced heating technology, which ensures a smooth and even distribution of warmth throughout a space. This is achieved through the use of high-quality heat exchangers that optimize the transfer of heat from the heating element to the surrounding air. By utilizing natural convection currents, these heaters maintain a consistent temperature while minimizing draftiness often associated with traditional heating methods.

The compact design of Bradford-White convection heaters allows for flexible installation options, fitting seamlessly into various environments without taking up excessive space. Their sleek and modern aesthetic complements a range of interior decors, making them not only functional but also visually appealing.

Energy efficiency is another key characteristic of these convection heaters. Equipped with advanced insulation materials and smart temperature controls, they operate with reduced energy consumption, resulting in lower utility bills for homeowners and businesses alike. Many models also come with programmable thermostats, allowing users to set specific heating schedules that align with their daily routines.

Durability and reliability are paramount in the manufacturing of Bradford-White convection heaters. Built with high-grade materials and subjected to rigorous testing, these heaters are designed to withstand the demands of daily use while providing safe operation. Features such as overheat protection ensure that the units operate safely, preventing any potential hazards.

Moreover, Bradford-White offers a variety of models to meet different heating needs. From wall-mounted units for smaller spaces to larger floor models for more substantial areas, customers can select the perfect unit to suit their specific requirements. The heaters are also backed by solid warranties, offering peace of mind for those investing in quality heating solutions.

In summary, Bradford-White Corp's convection heaters combine efficiency, design, and advanced technology, making them a top choice for consumers seeking reliable heating solutions. With features tailored to enhance performance and user experience, these heaters are well-suited for diverse applications, ensuring comfort in various environments year-round.
Top Page Image Contents