SECTION VII: OPERATING INSTRUCTIONS

WARNING

Water heaters are heat-producing appliances. To avoid damage or injury there must be no materials stored against the water heater or direct vent system, and proper care must be taken to avoid unnecessary contact (especially by children) with the water heater and direct vent system.

UNDER NO CIRCUMSTANCES SHOULD FLAMMABLE MATERIALS, SUCH AS GASOLINE OR PAINT THINNER BE USED OR STORED IN THE VICINITY OF THIS WATER HEATER OR IN ANY LOCATION FROM WHICH FUMES COULD REACH THE WATER HEATER.

Installation or service of this water heater requires ability equivalent to that of a licensed tradesman in the field involved. Plumbing, air supply, venting, gas supply, and electrical work are required.

Light the unit in accordance with the operation instructions label attached to the water heater.

Under no circumstances should the input rate exceed the input rate shown on the water heater rating plate. Over firing could result in damage or sooting of the water heater.

If the unit is exposed to the following, do not operate water heater until all corrective steps have been made by a factory authorized independent service contractor or qualified service professional.

1.Flooding to or above the level of the burner or controls

2.External firing

3.Damage

4.Firing without water

5.Sooting

Never operate the water heater without first being certain it is filled with water and a pressure relief valve is installed in the HOT WATER OUTLET PIPING of the WATER heater.

GENERAL INSTRUCTIONS

TO FILL THE WATER HEATER

1.Close the water heater drain valve by turning the knob or valve stem clockwise.

2.Open the cold water supply shut-off valve.

3.Open several hot water faucets to allow air to escape from the system.

4.When a steady stream of water flows from the faucets, the water heater is filled. Close the faucets and check for water leaks at the water heater drain valve, pressure relief valve, and the hot and cold water connections.

SEQUENCE OF OPERATION

1.Water heater senses the minimum operating water flow which starts the ignition sequence to light the burners.

2.Blower ON

3.Gas valve opens and spark igniter starts.

4.Main burner ON

5.Flame signal confirmed

6.Burner flame and combustion blower modulates to maintain selected outlet temperature

7.Water flow is also regulated to not exceed the capacity of the water heater for the temperature selected.

8.Water flow shuts off.

9.Burners shut off immediately, but combustion blower continues for another 65 seconds to purge heat from coil.

40

Page 39 Page 41
Page 40
Image 40
Bradford-White Corp TG-237E-N(X)A Section VII Operating Instructions, General Instructions To Fill the Water Heater
Page 39 Page 41

TG-199E-N(X), TG237E-N(X), TG-180E-N(X), TG-150E-N(X), TG-237E-N(X)A specifications

Bradford White Corporation is renowned for its innovative solutions in the water heating and storage sector, offering a range of high-quality products designed for residential and commercial applications. Among its standout offerings are the TG series models, including TG-237E-N(X)A, TG-150E-N(X), TG-180E-N(X), TG-237E-N(X), and TG-199E-N(X). These models are specifically designed to maximize efficiency while providing reliable hot water delivery.

One key feature of the TG series is its high Energy Factor (EF) ratings, which signify exceptional energy efficiency. The models employ advanced technologies that not only reduce energy consumption but also minimize environmental impact. These products typically include a highly efficient burner system that enhances heat transfer, ensuring that users enjoy maximum hot water availability without incurring high utility costs.

Each model is crafted with robust materials, designed to withstand the rigors of everyday use. For example, the tanks are typically built from durable steel and feature an advanced glass lining that protects against corrosion and extends the lifespan of the unit. Additionally, these models are equipped with high-quality insulation that helps retain heat, further improving efficiency.

The TG series also emphasizes user convenience and safety. Many units come with a user-friendly control system that allows for easy temperature adjustments and monitoring. This is complemented by built-in safety features such as automatic shut-off capabilities, helping to prevent overheating or other potential hazards.

Another characterizing aspect of the TG series is its flexibility in installation. These water heaters are designed to fit various spaces and configurations, ensuring that they can meet the needs of different households or commercial facilities. Additionally, some models are compatible with both natural gas and propane, offering versatility in fuel options.

In terms of technology, these Bradford White water heaters include features such as electronic gas control systems that provide precise temperature management, and advanced airflow designs that optimize combustion efficiency. This focus on technology ensures that the TG series is not only reliable but also a smart choice for cost-conscious consumers looking to reduce their energy bills.

In summary, the Bradford White TG series, with models like TG-237E-N(X)A, TG-150E-N(X), TG-180E-N(X), TG-237E-N(X), and TG-199E-N(X), stands out for its robust design, efficiency, and advanced safety features. Whether for residential or commercial use, these hot water solutions continue to meet the evolving needs of consumers while prioritizing reliability and performance.
Top Page Image Contents